PEEK is a high temperature resistant, high performance thermoplastic special engineering plastic.It has good mechanical
properties and chemical resistance, wear resistance, hydrolysis resistance and other properties;It has light specific gravity
, good self-lubrication performance, because of its very good processing performance, can be filled with carbon fiber,
disulfide and so on to further improve the lubrication performance and mechanical strength.
| roperty |
Item No. |
Unit |
PEEK-1000 |
PEEK-CA30 |
PEEK-GF30 |
| Mechanical Properties |
1 |
Density |
g/cm3 |
1.31 |
1.41 |
1.51 |
| 2 |
Water absorption(23ºC in air) |
% |
0.20 |
0.14 |
0.14 |
| 3 |
Tensile strength |
MPa |
110 |
130 |
90 |
| 4 |
Tensile strain at break |
% |
20 |
5 |
5 |
| 5 |
Compressive stress(at 2%nominal strain) |
MPa |
57 |
97 |
81 |
| 6 |
Charpy impact strength (unnotched) |
KJ/m2 |
No break |
35 |
35 |
| 7 |
Charpy impact strength (notched) |
KJ/m2 |
3.5 |
4 |
4 |
| 8 |
Tensile modulus of elasticity |
MPa |
4400 |
7700 |
6200 |
| 9 |
Ball indentation hardness |
N2 |
230 |
350 |
270 |
| 10 |
Rockwell hardness |
-- |
M105 |
M102 |
M99 |
PEEK Material features
Mechanical properties (variable stress and excellent fatigue resistance) High temperature resistance (long-term use at
2600C) Self-lubricity (low coefficient of friction and wear resistance) Chemical resistance (corrosion resistance) Flame
retardant (can reach the highest flame retardant standard) Peeling resistance (can be made into thin coated or
electromagnetic wire) Fatigue resistance (resin material has the best fatigue resistance) Hydrolysis resistance (excellent
in high temperature and high pressure water) Radiation resistance (up to 1100Mr AD)
Peek-1000 (natural color):PEEK-1000 is made of pure polyetherketone resin
Toughness and impact resistance in all PEEK grades. Peek-1000 can be sterilized with convenient disinfection methods
(steam, dry heat, ethanol, and Y radiation), and the raw materials used to manufacture peEK-1000 comply with eu and
US FDA regulations on food compliance. These characteristics make it very popular in the medical, pharmaceutical, and
food processing industries Peek-hpv (Black): The result of the addition of PTFE,
graphite and carbon fiber makes peEK-HPV a bearing grade plastic whose superior friction properties (low coefficient of
friction, wear resistance, high peak pressure limit) make this grade an ideal material for friction applications Peek-gf30:
This material is filled with 30% glass fiber reinforced grade stage material, more than peEK-1000 It has better rigidity and
creep resistance and better dimensional stability.
It is ideal for manufacturing structural parts that can withstand fixed loads for long periods of time at temperature.
If peEK-GF30 is used as a sliding piece, its suitability should be carefully checked as the glass fiber scratches the mating
surface Peek-ca30: This material is filled with 30% carbon fiber reinforced and has an advantage over peEK-GF30
Mechanical properties (higher elastic modulus, mechanical strength, and creep) and wear resistance, and the plastic
reinforced with carbon fiber is 3.5 times more thermally conductive than the unreinforced PEEK material -- it dissipates
from the bearing surface faster
Companies strictly enforce the ISO9001(2008)international quality certification system, the product quality conforms to
the eu RoHS standard.
The company has professional product technical consultation and after-sales service;Good market reputation (quality
assurance, reasonable price, timely delivery!)We will wholeheartedly provide you with the best quality products, the
most thoughtful service!
Specializing in the production of "engineering plastic accessories" of high-tech enterprises, the company has a set of
imported production equipment and CNC processing equipment, processing means advanced, strong technical force.
The company has rich experience, strong strength and participated in many high-end exhibitions;
Many partners from other countries are visiting
Q1. We don't have drawings, can we produce according to the samples we provide?
A1. OK
Q2. How to customize plastic parts?
A2. Customized according to drawings
Q3. Can I make a sample for testing first?
A3. OK
Q4. How long is the proofing cycle?
A4. 2-5 days
Q5. What are your processing equipment?
A5. CNC machining center, CNC lathe, milling machine, engraving machine, njection molding machine, extruder, molding
machine
Q6. What craftsmanship do you have for processing accessories?
A6. According to different products, different processes are used, such as machining, extrusion, injection molding, etc.
Q7. Can injection products be surface treated? What are the surface treatments?
A7. OK. Surface treatment: spray paint, silk screen, electroplating, etc.
Q8. Can you help assembling the product after it is made?
A8. OK.
Q9. How much temperature can the plastic material withstand?
A9. Different plastic materials have different temperature resistance, the lowest temperature is -40ºC, and the highest
temperature is 300ºC. We can recommend materials according to the working conditions of your company.
Q10. What certifications or qualifications does your company have?
A10. Our company's certificates are: ISO, Rohs, product patent certificates, etc.
Q11. How scale is your company?
A11. Our company covers an area of 2,000 square meters and has 100 employees.
PEEK is a high temperature resistant, high performance thermoplastic special engineering plastic.It has good mechanical
){kind=link}