Pei Plate Rod Tube High Temperature Resistant

• Material: Pei
• Kind: Engineering Plastic Sheet
• Water Absorption: 1.5%~3.5%
• Contraction Percentage: ＜0.4%
• Tensile Strength: 51~80MPa
• Model Name: Pei1000 Sheet
• Type: Pei Sheet (100% Virgin Pei Raw Material)
• Certification: ISO9001, SGS, Test Report,RoHS
• Density: 1.5kg/Cm3
• Color: Amber Semi-Transparant
• Transport Package: Packing in Paper Carton and Wooden Pallet
• Specification: Customized
• Trademark: Engineering plastics
• Origin: Guangzhou, China
• HS Code: 3926909090
• Production Capacity: 10000pieces/Month

Product Description

PEI parts custom made Ultem PEI1000 sheet

 

1. Description:
PEI (Ultem® PolyEtherImide) is an amorphous high-performance polymer, with high mechanical efficiency, as well as very good thermal resistance and chemical stability (continuous operating temperature at approximately 180°C), high dimensional stability and creep strength. As it has the best torsional strength of all thermoplastic plastics, it has become a cheap substitute for small steel cutting parts. 
2. Advantages:
1. High heat-resistant(long-term temperature resistant on180°C);
2. Good mechanical strength, high stiffness;
3. Excellent hydrolysis resistance,
4. Excellent physical inertness (thus suitable for contact with food);
5. Very good dimensional stability;
6. Good resistance to UV and high energy radiation ("γ"rays and"χ"rays);
7. Good electric insulation property.
 3. The Ultem PEI Grades:
(1)  Ultem® 1000 (unfilled) (2) Ultem® 2300(30% glass filled)
(3)  Ultem® 2100(10% glass filled) (4)  Ultem® 2200(20% glass filled)
 
Name:  PEI sheet ( Polyetherimide sheet )
Type: Sheet and rod
 Size:

PEI Sheet
Thickness (mm)	Width/Length   (mm)
5-100	500*1000/1200mm
5--100	610 x*1000/1200mm
PEI Rod
OD (mm)	Length   (mm)
5-200	1000mm

 Material: 100% virgin Ultem PEI1000 Raw Material. 
Color: nature ( amber semi-transparant  )
Ultem® 2300 (30% Glass Filled Polyetherimide)
Products > Plastic Stock Shapes > Ultem® 2300 (30% Glass Filled Polyetherimide)
Ultem® 2300 is a glass fiber reinforced high performance engineering thermoplastic polymer that provides superior strength and stiffness. It has excellent chemical resistance and has a continuous service temperature of 340 degrees F. It is easily machined with conventional metal working equipment and can be machined to very close tolerances. Both sheet and rod are available in many thicknesses and diameters. Rod stock comes ground to diameter to accommodate through spindle turning. Standard colors are tan and black, and custom colors are available only as custom runs.
Ultem® 2300 enhanced structure increases its rigidity and improves dimensional stability while maintaining many of the useful charactoristics of unfilled Ultem. Also, since it is an amorphous material, care needs to be taken if machined with coolant. If used, non aromatic coolants should be used to avoid crazing.
The Data Sheet of PEI (Ultem® PolyEtherImide)

ASTM or UL Test	Property	Ultem® 1000 unfilled STOCKED	Ultem® 2100 10% glass SPECIAL ORDER	Ultem® 2200 20% glass SPECIAL ORDER	Ultem® 2300 30% glass STOCKED
PHYSICAL RESISTANCE
D792	Density (lb/in³) (g/cm³)	0.046 1.28	0.048 1.34	0.051 1.42	0.055 1.51
D570	Water Absorption, 24 hrs (%)	0.25	0.21	0.19	0.18
D570	Water Absorption, Saturation (%)	1.25	1.20	1.10	0.90
D570	Self extinguishing (Ul-94 Grade)	V-0	V-0	V-0	V-0
MECHANICAL RESISTANCE
D638	Tensile Strength (psi)	16,500	16,800	16,900	17,000
D638	Tensile Modulus (psi)	500,000	650,000	700,000	800,000
D638	Tensile Elongation at Break (%)	80	6	3	3
D790	Flexural Strength (psi)	20,000	23,000	25,000	27,000
D790	Flexural Modulus (psi)	500,000	-	-	850,000
D695	Compressive Strength (psi)	22,000	24,000	28,000	32,000
D695	Compressive Modulus (psi)	480,000	-	-	625,000
D785	Hardness, Rockwell	M112 / R125	M114 / R127	M114 / R127	M114 / R127
D256	IZOD Notched Impact (ft-lb/in)	0.5	0.6	0.8	1.0

 

Specification	Test	Value	Units
Specific Gravity, 73°F	D792	1.51	-
Tensile Strength @ Yield, 73°F	D638	17,000	psi
Tensile Modulus of Elasticity, 73°F	D638	800,000	psi
Tensile Elongation (at break), 73°F	D638	3	%
Flexural Strength, 73°F	D790	27,000	psi
Flexural Modulus of Elasticity	D790	850,000	psi
Shear Strength, 73°F	D732		psi
Compressive Strength - Ultimate			psi
Compressive Strength at 2% Deformation	D695		psi
Compressive Strength at 10% Deformation	D695	32,000	psi
Deformation Under Load		< 1	%
Compressive Modulus of Elasticity, 73°F	D695	625,000
Compressive Strength ⊥ to Laminate (Modulus)			psi
Compressive Strength ⊥ to Laminate (Yield)			psi
Compressive Strength ⊥ to Laminate (Ultimate)			psi
Hardness, Durometer (Shore "D" scale)	D2240	D86
Hardness, Rockwell (Scale as noted)	D785	M112 (R127)	Rockwell M
Izod Impact, Notched @ 73°F	D256 Type A	1	ft.lbs/in. of notch
Coefficient of Friction (Dry vs Steel) Static	PTM 55007
Coefficient of Friction (Dry vs Steel) Dynamic	PTM 55007
Maximum Static Bearing Load (P)	PTM 55007	1,000	psi
Maximum Unlubricated No Load Bearing Velocity (V)	PTM 55007		ft/minute
Maximum Limiting PV (Unlubricated)	PTM 55007		psi x ft/min.
Wear Factor "K" x 10^-10	PTM 55010		Cubic in.-min/ft.lbs.hr
Sand Wheel Wear/Abrasion Test		80	UHMW=100
Minimum Mating Surface Hardness		30	Rockwell (Brinnell)
Coefficient of Linear Thermal Expansion	E-831 (TMA)	1.1	in/in/°F x 10^-5
Coefficient of Thermal Expansion // to Laminates	E-831 (TMA)	1.1	in/in/°F x 10^-5
Coefficient of Thermal Expansion I to Laminates	E-831 (TMA)	1.1	in/in/°F x 10^-5
Softening Point		400	°F
Heat Deflection Temperature 264 psi	D648	410	°F
Embrittlement Temperature			°F Min.
Continuous Service Temperature in Air		340	°F Max.
Short Term Service Temperature		360	°F Max.
Tg-Glass Transition (Amorphous)	D3418	410	°F
Melting Point (Crystalline) Peak	D3418		°F
Thermal Conductivity	F433	1.56	BTU-in/(hr/ft^2°F)
Dielectric Strength Short Term	D149	770	Volts/mil
Surface Resistivity	D257	>10^13	ohm/cm
Volume Resistivity	D257		ohm/cm
Dielectric Constant, 106 Hz	D150	3.7
Dissipation Factor, 106 Hz	D150	0.0015
Flammability @ 3.1mm(1/8 in.) UL94	UL94	V-0
Arc Resistance			seconds
Water Absorption, Immersion 24 Hours	D570 (2)	0.18	%
Water Absorption, Immersion Saturation	D570 (2)	.9	%
Machinability Rating		1	1=easy, 10=difficult
Rod Diameter Availability (Off the Shelf)	.50	6.0	inches
Sheet Thickness Availability (Off the Shelf)	.030	3.0	inches

Characteristics / Attributes

Superior Chemical Resistance / 340F Cont. Service Temp Excellent rigidity and stiffness.

Regarding conductive antistatic PEI (polyetherimide) materials, antistatic 6-9 power stable performance! PEI (Polyetherimide) Tepla® T8000 is a kind of special engineering plastic with excellent performance, which can be used at high temperature of 170ºC for a long time.
Compared with other special engineering plastics, Tepla® PEI polyetherimide has high temperature resistance, fatigue resistance, creep resistance, abrasion resistance, chemical corrosion resistance, inherent flame retardancy, radiation resistance, low temperature resistance , high mechanical strength and electrical properties and other advantages.
1. High temperature resistance; 2. Chemical corrosion resistance and hydrolysis resistance; 3. Physical and mechanical properties; 4. Light weight and stable size; 5. Inherent flame retardancy; 6. Electrical insulation and electrical stability; 7. Self-lubrication and wear resistance; limitations: 1. Relatively high price; 2. High processing temperature requirements
We can not only customize plates, rods and tubes, but also other high temperature resistant processing parts and other plastic products
We can provide customers with customized high-performance modified plastic services, these services include: structural reinforcement, conductive and electronic shielding, flame retardant, self-lubricating high wear resistance, long (short) carbon fiber reinforcement, nano-plastics, long (short) ) Glass fiber reinforced (LFT) high specific gravity, low specific gravity, medical grade, high temperature resistance, high toughness, thermal insulation, electrical conductivity and thermal conductivity, laser marking, magnetically detectable, spray-free plastics and special dyeing services to meet the differentiated needs of customers , to ensure the exclusivity of products and create greater added value for customers.

How To Customiz
NO.1 Mailing samples Our engineers can measure the specifications and test the materials to make an identical product based on the sample you provide.
Provide drawings
NO.2We support CAD drawings, PDF files, STP, STEP,X-T and other 3D formats for customization and confidential processing of products according to your needs.
NO.3 Only photos
If you only have photos and no detailed drawing samples we can also process and make products for you if you provide us with the detailed dimensions of your products.

ApplicationWe have a professional engineer team to design custom parts for your needs , we also have ready-made standard moulds that can save your cost and time . We offer ODM/OEM service, Production Design and Mould Design base on your requirement . Providing the sample before mass production , ensure all is OK for you .

If you have any problems or want to get the quoted price of any plastics or machined components, please feel free to contact us. Our engineers will reply to you as soon as possible.

A wide range of injection mold options
Our products cover auto parts mold, electrical appliances injection mold, medical machinery and so on. We provide products and services to more than 60 countries and regions in the world, including Europe, the United States and Southeast Asia.
Our Factory
Our factory has 100 sets of precision processing equipment, welcome to visit our factory!

The factory covers an area of 10,000 square meters Production equipment has the original American imported Haas CNC machining center, wire-electrode cutting, electrical discharge machine,Perforating machine, injection molding machine, CNC milling machine,CNC hobbing machine, CNC lathe, CNC milling machine, CNC lathe, CNC milling machine, grinding machine and other machinery and equipment.
One-stop Service
OEM, ODM, Customization service,Reasonable and competitive price,Design for Manufacturability (DFM) analysis with every quote,Short Delivery Time.
Reliable mold expert 15+ years' experience, Cooperated with many world famous brands for many years, Specialize in large and complex injection mold making, One-stop service from design to production.

Certification
Companies strictly enforce the ISO9001(2008)international quality certification system, the product quality conforms to the eu RoHS standard.

Professional team

Our company is developing in the mode of quality for survival, brand for development and customer's demand, welcome new and old customers to visit our factory for guidance.

Client Witness

Our Exhibition & CCTV Interview
FAQ:
1.A: What's the size of plastics sheet?
   B:Nylon sheet:Thickness*Width*Length:20-100*1000*2000mm
       UHMW-PE sheet:Thickness*Width*Length:20-100*1000*2000mm; 20-100*1250*3130mm; 20-100*1250*4250mm
     POM sheet:Width*Length:1000*2000mm
2. A:Can we purchase a small part of plastics sheet?
    B: Yes,you can, if we have the size you require in stock.
3. A:What color of plastics sheet?
    B: Nylon sheet:  Natural,black,blue,or according to client's requiremnet.
         UHMW-PE sheet:  White,black,green ,bule,yellow,or according to client's requirement.
         White,black
4. A:Can you manufacture the plastics products as per drawing?
    B: Yes,we can. 
5.A: What the precision of plastic products according to drawing?
   B: Different machine with different precision,it usually around 0.05-0.1mm
6.A: What the technologies in producing plastics parts?
   B: Different products with different technologies,such as CNC machine,Extrusion,Injection
7: A:What kinds of processing machine do you have?
    B: CNC machining center,CNC lathes,Milling,Injection Molding Machine,Extruder,Moulding press