Malleable Sliding Peek-GF30 Flange

• Customization: Available
• Pressure: High Pressure Mechanical Seals
• Speed: Ultra-High-Speed Mechanical Seal
• Model NO.: peek
• Performance: High Pressure
• Standard: Standard, Nonstandard
• Type: Peek1000
• Balance: Balanced
• Transport Package: Packaging Can Be Customized on Demand
• Specification: RoHS
• Trademark: Guangzhou Engineering Plastics
• Origin: Guangzhou, China
• Production Capacity: 100000

Product Description

PEEK(Polyetheretherketone)is a kind of heat-resistant, high performance thermoplastic special engineering plastics. It
has good mechanical properties and chemical resistance, abrasion resistance, and hydrolysis resistance properties etc.;
it has a light proportion and self-lubricating properties. Guangzhou Engineering Plastics Industries (Group) Company, has
studied and applied this material in many industries for many years. Due to very good processing properties,
it can be filled with carbon fiber, Fiberglass and MoS2 etc. In order to improve lubrication performance and mechanical
strength further. PEEK Material features
Mechanical properties (variable stress and excellent fatigue resistance) High temperature resistance (long-term use at
2600C) Self-lubricity (low coefficient of friction and wear resistance) Chemical resistance (corrosion resistance) Flame
retardant (can reach the highest flame retardant standard) Peeling resistance (can be made into thin coated or
electromagnetic wire) Fatigue resistance (resin material has the best fatigue resistance) Hydrolysis resistance (excellent
in high temperature and high pressure water) Radiation resistance (up to 1100Mr AD)High Quality PEEK Valve
PEEK Material-Model No.:
PEEK-1000 (Natural) This general purpose grade is unreinforced and offers the highest elongation and toughness of all
PEEK grades. The newly available black PEEK 1000 is ideal for instrument components where aesthetics are important,
as well as for seal components where ductility and inertness are important. PEEK GF30 (30% Glass-Reinforced) The
addition of glass fibers significantly reduces the expansion rate and increases the flexural modulus of PEEK. This grade
is ideal for structural applications that require improved strength, stiffness or stability, especially at temperatures above
300°F (150°C). PEEK CA30 (30% Carbon Fiber-Reinforced) The addition of carbon fibers enhances the compressive
strength and stiffness of PEEK, and dramatically lowers its expansion rate. It offers designers optimum wear resistance
and load carrying capability in a PEEK-based product. Guangzhou Engineering Plastics Industries (Group) Company has
studied and applied this material in many industries for many years. This grade provides more thermal conductivity than
unreinforced PEEK -- increasing heat dissipation from bearing surfaces improving bearing life and capability. PEEK HPV
(Bearing Grade) Carbon fiber reinforced with graphite and PTFE lubricants, our newest grade of PEEK offers the lowest
coefficient of friction and the best machinability for all PEEK grades. An excellent combination of low friction, low wear,
high LPV, low mating part wear and easy machining, make it ideal for aggressive service bearings.

Property		Item No.	Unit	PEEK-1000	PEEK-CA30	PEEK-GF30
Mechanical Properties	1	Density	g/cm3	1.31	1.41	1.51
	2	Water absorption(23ºC in air)	%	0.20	0.14	0.14
	3	Tensile strength	MPa	110	130	90
	4	Tensile strain at break	%	20	5	5
	5	Compressive stress(at 2%nominal strain)	MPa	57	97	81
	6	Charpy impact strength (unnotched)	KJ/m2	No break	35	35
	7	Charpy impact strength (notched)	KJ/m2	3.5	4	4
	8	Tensile modulus of elasticity	MPa	4400	7700	6300
	9	Ball indentation hardness	N2	230	350	270
	10	Rockwell hardness	--	M105	M102	M99

Companies strictly enforce the ISO9001(2008)international quality certification system,
the product quality conforms to the eu RoHS standard.Our company has professional product technical consultation and after-sales service. Good market reputation (quality
assurance, reasonable price, timely delivery! ) We will wholeheartedly provide you with the best quality products, the most
thoughtful service!
Guangzhou Engineering Plastics Industries (Group) Co.,LTD.  We have the professional engineer teams and sales teams,
and we have technology and experiences in engineering plastic industry for morethan 15 years! Our company is located
in Huangpu District, Guang zhou City, China, where the logistics is developed! With the rich experiences and technology
for manufacture, design, research and development ability, support personalized customization. We have full set of high
efficiency producing equipment and advanced numerical control machines,such as: molding injection machines, CNC
molding manufacture machines, fine carving machines, Horizontal lathes, milling machines. We can customize all kinds
ofEngineering plastics products according to our customers'drawings or samples. Specializing in the production of "engineering plastic accessories" of high-tech enterprises,
the company has a set of imported production equipment and CNC processing equipment, processing means advanced,
strong technical force.
Our company has rich experience, strong strength and participated in many high-level exhibitions.
Many partners from other countries are visitingCooperate with many well-known companiesQ1. We don't have drawings, can we produce according to the samples we provide?
A1. OK
Q2.  How to customize plastic parts?
A2. Customized according to drawings
Q3. Can I make a sample for testing first?
A3. OK
Q4. How long is the proofing cycle?
A4. 2-5 days
Q5. What are your processing equipment?
A5. CNC machining center, CNC lathe, milling machine, engraving machine, njection molding machine, extruder, molding
machine
Q6. What craftsmanship do you have for processing accessories?
A6. According to different products, different processes are used, such as machining, extrusion, injection molding, etc.
Q7. Can injection products be surface treated? What are the surface treatments?
A7. OK. Surface treatment: spray paint, silk screen, electroplating, etc.
Q8. Can you help assembling the product after it is made?
A8. OK.
Q9. How much temperature can the plastic material withstand?
A9. Different plastic materials have different temperature resistance, the lowest temperature is -40ºC, and the highest
temperature is 300ºC. We can recommend materials according to the working conditions of your company.
Q10. What certifications or qualifications does your company have?
A10. Our company's certificates are: ISO,  Rohs,  product patent certificates, etc.